PVQ Series Industrial Piston Pumps, Up To 30 GPM & 1800 RPM, Up To 3000 PSI

CAUTION	Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level.
Fluid Viscosity	80-180 SSU (Running), 2300 SSU Maximum at Startup.
Note	Ratings based on using anti wear hydraulic fluid or automotive type crankcase oil designations SC, SD, SE or SF per SAE J183FEB80. For information on use with fire resistant fluids, contact us for assistance.
Pressure Limit	Outlet: (Varies with displacement. See table below). Case: 5 PSI. Inlet: 5 in. Hg vacuum to 30 PSI.
Rated Speed	1800 RPM.
Recommended Filtration	ISO level 18/16/14 (<2000 PSI), level 17/15/13 (2000-3000 PSI).
Seals	Viton® standard.
System Temperature	0°F to 150°F (Optimum Range), 0°F to 180°F (Extreme Range).

Part Number	Model Number	Displacement	Rated Flow	Control	Mount	Shaft	Features	Maximum Operating Pressure	Pressure Rating
02-341552	PVQ20-B2R-SE1S-21-C21-12	1.29	10	Pressure Compensated (350-3000 PSI range, set 3000 PSI)	2-Bolt SAE B	7/8 Straight Keyed	Reduced operating noise\|Longer life\|Lower operating pressure	3000	3000
02-341576	PVQ10-A2R-SE1S-20-C21-12	0.64	4.98	Pressure Compensated (350-3000 PSI range, set 3000 PSI)	2-Bolt SAE A	3/4 Straight Keyed	Reduced operating noise\|Longer life\|Lower operating pressure	3000	3000
02-341685	PVQ32-B2R-SE1S-21-C14-12	2.01	15.66	Pressure Compensated (350-3000 PSI range, set 2000 PSI)	2-Bolt SAE B	7/8 Straight Keyed	Reduced operating noise\|Longer life\|Lower operating pressure	2000	2000